TEKKÖK | Traditional Mortar Spraying Machine with Output Control PME-40 MAX

AC Power	380 V, 50 Hz
Pump motor	7.5 kW
Loader motor	3 kW
Compressor	420 lt/min @ 8 bar
Delivery rate	45 lt/min
Delivery distance	120 m wide, 40 m high
Ideal grain size	0 - 7 mm
Max. grain size	10 mm
Max. pressure	40 bar
Mixer volume	150 lt
Filling height	1350 mm
Dimensions (L x W x H)	3100 x 1200 x 1350 kg
Weight	1000 kg

It is one of the unique plaster machines, designed in particularly for external plastering with site mixes. This is a great product which modernizes the old and traditional methods of plastering with very practical and cost effective results.

The plaster components are manually mixed with water in the mixer. The mixer pours out the plaster mix into the pump when the loading arm is pulled. Then, it is pumped through the hose, and sprayed onto the surface where the plaster is applied.

It is ideal for the application of site mixes (ex. cement-sand), or dry premixed interior and exterior rendering, colored mortar, limestone mortar, base coat, light wall mortar, ornamental plaster, ready-mix plaster, liquid screed and for filling and grouting works.

It is a very unique plaster machine which does not have any equivalent or similar.
It is the only plaster machine which has no limits and works at full performance.
It can pump all kinds of sand and similar materials.
It applies all kinds of mixes with the approprite grain size and viscosity which will not block the hose.
Mixer is independent from the pump and works continuously.
It applies plaster smoothly and plaster does not fall off the surface.
It is a semi-automatic machine with a continuous mixer.
Mixer makes homogenous mixes.
Waste-consumption will not be experienced as the mix is homogenous.
Problems caused by blockage of the pump will not be experienced thanks to the homogenous mix.
Operator can stop/start the spraying automatically by the valve of the spray gun.
Mixer keeps working when the system is stopped by the valve of the spray gun
It is a qualified stationary pump which has the capacity to pump the mortar from ground to floors.
Its motor and reduction gear are very powerful.
It does not block the pump or cause any other trouble when stopped and re-started.
It can be used for conveying floor-screed, transfering mortar and grouting.
It is mobile.
Its trailer is robust and convenient for all conditions.
It can be pulled safely by a vehicle.
It is very practical and easy to dismount and clean the parts of the pump.
It will work for years like the first day if it is properly cleaned and maintained.
It has emergency button which will stop the machine in case of emergency.
It conforms to the European and world standards.

P6 rotor-stator
1.5" Rubber Concrete Hose
3/8" Air Hose
Spray nozzle (0-5 mm)
Finishing tools
Cleaning Equipment

Traditional Mortar Spraying Machine with Output Control

We are always ready to help !

"Construction, Tunnel, Mine"

16. year in Machinery Production...

CONCRETE | SHOTCRETE | TRUCK | SCREED | PLASTER | GROUT | ATEX